Deaver Progressive Series springs are high-quality 9-leaf and 10-leaf units fabricated with high grade 5160 “American Made” steel. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. The even, linear compression rate curve of our progressive system spring is the primary key to excellent ride quality.

Other designs features include full military-wrapped spring eyes for superior durability, diamond cut inner leaf ends minimizing shear points and anti-friction pads inserted between the leafs for a smoother ride and quiet operation.

Combined with properly valved shock absorbers, the ride is enhanced beyond belief.

11 leafs, rebound wrap, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips. Designed for off road performance. Reduces bed bounce, eliminates wheel hop and increases wheel travel.

The DID Damper Interface Device enables users with full vehicle functionality with aftermarket dampers without any permanent modifications to the vehicle.

With the introduction of the Live Valve system, aftermarket damper modifications are not as seamless as prior model year vehicles. Once the factory Live Valve dampers are removed, our team has found that the vehicle enters a faulted state. Consequently, Drive Modes are disabled and thus full Engine, Transmission, Anti-Lock Braking, Traction Control, Steering, and Driveline performance is restricted.

The Damper Interface Device enables users with full vehicle functionality with aftermarket dampers without any permanent modifications to the vehicle. The device is user installed in five minutes or less and enables full cluster functionality with aftermarket suspension systems.

Anyone considering taking an Off Road trip with 2019 up Raptors should order one of these up as a simple insurance policy.  If any of the following are damaged or wires broken / crimped, live valves, ride height sensors or wheels speed sensors (ABS) the control system will go into limp mode. Depending on the severity, the truck may go into full limp mode which may include some of the following.  Power Steering will not function, Engine power will be reduced, adjusting Terrain Modes will not be an option.  This device will bypass the Live Valve controller fault.

• • Allows for the use of Aftermarket Shocks
• • Simply unplug one connection and connect it into this device
• • RPG logo laser teched
• • Damper Interface Device (DID)
• • Does NOT require removal or Disassembly of the Factory Fox Shock
• • Please go to our tech help section for Installation Instructions
• • Patented Technology
• • Proudly made in the USA
• • “Offroad Use Only”

THIS PRODUCT FITS THE FOLLOWING:

• 2020 Ford Raptor
• 2019 Ford Raptor

• CNC 3/16 BENT PLATE
• Poly Bushings
• Greater Strength over Stock
• Satin Black Powdercoat
• LOGO plate has been removed since original release

• X-treme Offroad Mode = Over 1.5" Extra Bump Travel
• Stock Offroad Mode
• 2.0 Fox Racing Shox Internal Floating Piston Bump Stop 
• CNC Laser Cut and Bent Plate
• Grade 8 Hardware
• 100% Bolt On
• Works With All Exhaust Systems.
• Included Installation Wrench 

For Video Of The New Fox IFP Bump Stop In Action

NOTE: WE HAVE ADDED A THIRD BOLT TO THE FRAME WITH A SUPPLIED FLANGED NUT.  ALSO, FOX HAS SWITCHED OUT 2021 2.0 IFP BUMPS WITH ORANGE RINGS VS GOLD.

Note: the video doesn't show the new revised adjustable bump system.  All new kits will be sent out with three bolts holding it to the frame, and not the two as shown in the video. SVC will supply a third nut welded to a large washer to be used in the middle hole of the frame brace.

OVERVIEW:
We've been hard at work developing our new Adjustable Bump System for the 2017+ Gen 2 Ford Raptor.  We've not only stayed with our industry-leading adjustable but added to it for the Gen 2 crew.  We are now featuring Fox's Racing Shox Internal Floating Piston bump stop.  What does this mean?  Simple, you have all the bottoming out compression control that you could ever need, but still have a soft initial impact which reduces rear-end donkey kicking that plagues these trucks with other bump kits.

For more detailed info on how this bump works,

The Gen 2 ABS kit is fitted with a removable bump can that can be adjusted up or down.  When you move the bump can up, the kit is then in Xtreme Offroad mode. The highest setting will allow you to install a rear Bypass Rack and run a longer race shock through the bed for increased damping and bump travel.  

Note:  Leave the bump can in stock setting for all shock applications that mount to existing factory shock mounts.

WELD'S ON FRAME SHOULD BE SANDED DOWN PRIOR TO INSTALLATION TO ENSURE PROPER FITMENT AND TO AVOID DAMAGE TO SVCOFFROAD PRODUCT

Taking inspiration from off-road racing, the Factory Race Series rear upgrade kit for the Gen 2 Raptor utilizes the same technology and parts found on the top race-winning off-road machines, including External Bypass position-sensitive damping, Quick Adjust Bypass (QAB), and an External Cooling System (ECS2).

This kit delivers the next level of off-road performance without sacrificing every day ride quality.

THIS PRODUCT FITS THE FOLLOWING:

By using vehicle sensors and accelerometers, Live Valve can instantly adapt to inertial, steering, braking, and acceleration inputs to actively maximize handling, comfort, and bottom-out resistance. Three-way quick switch adjusters allow the shocks to be optimized for On-Road Performance, On-Road Comfort, or Off-Road Performance while the external cooling system ensures they will perform at their best when you are blasting through the desert.

NEW Live Valve semi active technology equipped, plug and play integration to factory electronics
NEW Rebound and compression adjustable via Quick Switch Technology (QS3)
NEW Rotatable hose fittings for easy installation
FOX patented, position-sensitive Internal Bypass damping technology

THIS PRODUCT FITS THE FOLLOWING:

Deaver Progressive Series springs are high-quality 9-leaf and 10-leaf units fabricated with high grade 5160 “American Made” steel. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. The even, linear compression rate curve of our progressive system spring is the primary key to excellent ride quality.

Other designs features include full military-wrapped spring eyes for superior durability, diamond cut inner leaf ends minimizing shear points and anti-friction pads inserted between the leafs for a smoother ride and quiet operation.

Combined with properly valved shock absorbers, the ride is enhanced beyond belief.

12 leafs, rebound wrap, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips. Designed for off road performance. Reduces bed bounce, eliminates wheel hop and increases wheel travel.

Deaver Progressive Series springs are high-quality 9-leaf and 10-leaf units fabricated with high grade 5160 “American Made” steel. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. The even, linear compression rate curve of our progressive system spring is the primary key to excellent ride quality.

Other designs features include full military-wrapped spring eyes for superior durability, diamond cut inner leaf ends minimizing shear points and anti-friction pads inserted between the leafs for a smoother ride and quiet operation.

Combined with properly valved shock absorbers, the ride is enhanced beyond belief.

12 leafs, rebound wrap, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips. Designed for off road performance. Reduces bed bounce, eliminates wheel hop and increases wheel travel.

Deaver Progressive Series springs are high-quality 9-leaf and 10-leaf units fabricated with high grade 5160 “American Made” steel. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. The even, linear compression rate curve of our progressive system spring is the primary key to excellent ride quality.

Other designs features include full military-wrapped spring eyes for superior durability, diamond cut inner leaf ends minimizing shear points and anti-friction pads inserted between the leafs for a smoother ride and quiet operation.

Combined with properly valved shock absorbers, the ride is enhanced beyond belief.

12 leafs, rebound wrap, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips. Designed for off road performance. Reduces bed bounce, eliminates wheel hop and increases wheel travel.