Add style and protection to your Ford Ranger with the Stealth Fighter rear bumper. The steel plate design gives your Ford Ranger a modern look while also giving your truck superior protection without adding size and bulk. Reinforced clevis mounts designed to accept 3/4" D-Rings provides your Ford Ranger with extra utility. And mounts for two cube lights provide your truck with additional lighting when off-roading.

Give your Ford Ranger an upgrade with the Stealth Fighter steel plate front bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection. Each Stealth Fighter bumper comes equipped with our patented universal light mount system in the center of the bumper. Mount up to 10 cube lights or a 40" radius light bar. Mix and match any brand and size light to give your Ford Ranger the optimal lighting setup that you need on your off-road adventures. Additional lighting behind the side panels can mount a single cube light per side. Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.

Our Adaptive Cruise Control Relocation Kit is required to maintain your ACC capabilities when mounting aftermarket front bumpers to 2024+ Ranger Raptors. The bracket is adjustable for fine tunability and designed to mount behind the grille. Finished with a hammer black powder coat. Made in America.

Our Phantom Full-Sized Front Bumper introduces a low-profile knife edge design. Mount either a 20-inch radius LED light bar or six cube lights to the integrated center mount. In addition, the sides include mounts for a pair of 10-inch SR LED light bars.

Features a 3/16-inch aluminum skid plate with included air vents that provide proper ventilation to the intercooler and radiator. Included satin black powder coated accent panels.

Add-on our Adaptive Cruise Control Relocation Kit to maintain your ACC capabilities. The bumper retains all other OEM features such as parking sensors, recovery points, and the intercooler. Constructed from steel and finished with a 2-stage hammer black powder coat finish. Made in America.

*Please Note: Our Adaptive Cruise Control Relocation Kit is required to maintain your ACC functions.

Our Phantom Series Rear Bumper features a knife’s edge design that offers improved ground clearance and an aggressive stance. Toward each side of the bumper you can mount a pair of 3-inch cube lights for supplemental rear lighting. The low-profile fitment and satin black accent panels complement the factory lines of your truck for a trim and sleek look. Our bumper retains all of the rear factory features such as the parking sensors, recovery points, license plate lights, and trailer plug and wiring. Manufactured from American steel and finished in a durable 2 stage hammer black powder coat finish, this bumper is made to withstand the harsh off-road environment. As always, our Phantom Rear Bumper is fully bolt-on and proudly made in America.

• Made In The USA
• Grade 8 Hardware
• CNC Bent and Formed
• Satin Black Powder Coat
• Skid Plate Now Comes Black Powder Coated
• Race Truck Inspired Design
• Optional Light Bar Configurations.
• Build In Parking Sensors.  
• Made In The U.S.A.

OVERVIEW:

The new SVC Offroad 2019 + Gen 5 Ford Ranger Baja Front Bumper is a sleek and minimalist bumper that transforms the front of your truck into a true desert pre-runner with huge approach angle and sleek lines that give you a true racer feel.  All of our aftermarket bumpers are powder-coated satin black utilizes grade 8 hardware and retains factory parking sensors. Whether you prefer Baja Designs, Rigid or KC Hilites, your new Baja Bumper is the perfect addition to illuminate the road ahead and give you the extra confidence needed to push your truck harder in the dirt.  

• CNC Billet Aluminum
• Camber / Caster Adjustable On The Truck
• Billet Dirt Cap For Longer Uniball Life
• FK Bearings and Rodends
• Hard Anodized
• Compatable With Fox and King Factory Coilovers.

• Direct Replacement of Factory Spring Perch
• Levels Truck
• Fits On Factory Shock
• Billet Aluminum
• Hard Anodized
• Made In The USA
• Allows You To Run Larger Tire Size

OVERVIEW:

Tired of the rear high stink bug look?  SVC Offroad has and easy fix.  We developed a lower spring perch collar leveling system to work with your existing Gen 5 Ford Ranger shock.  By simply replacing the lower spring collar with our new larger billet unit, you will be able to level the front of your truck and fit up to 33" tires (note, depending on the tire triming may be required). 

The install is easy and straignt forward and totally transforms the look and feel of your truck.

The Performance Series 2.0 IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.

The precision metal impact aluminum body increases cooling capacity and will never rust. Inside you will find our race-proven performance valving technology Our Internal Floating Piston (IFP) mono-tube design separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum performance from the factory-tuned precision valving. The race developed high flow damping piston matched with application specific valving provides the Performance Series 2.0 IFP shock a predicable ride quality capable of handling the roughest road conditions.

 THIS PRODUCT FITS THE FOLLOWING:

• 2020 Ford Ranger
• 2019 Ford Ranger

Our bolt-on, Performance Series Coil-over IFP shock is loaded with advanced technology and a long list of features that set it apart. The precision, metal impact extruded aluminum body increases cooling capacity and is rust resistant. The vehicle-specific upper mount includes a composite bushing that isolates noise and vibration.

Locking, spring preload rings that allow easy ride height and preload adjustment retain a top quality racing coil, selected to deliver the optimal spring rate. Performance Series Coil-Over IFP shocks bolt on with no modifications and are designed to level your truck front-to-rear. Applications are available for stock and lifted trucks that re-use the stock shock.

Inside is an internal reservoir with Internal Floating Piston (IFP) mono-tube design separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum performance from the factory-tuned, precision valving. The easy-to-install, Performance Series 2.0 Coil-over IFP provides a comfortable on-road ride and predictable off-road handling in even the toughest conditions.

THIS PRODUCT FITS THE FOLLOWING:

• 2020 Ford Ranger
• 2019 Ford Ranger

Factory Race Series 2.5 Reservoir smooth body shocks give you enhanced ride quality and the control you need when heading off the pavement. They take their design from our Off-Road race shocks, so they've been thoroughly perfected in brutal conditions that you will probably never see. Our athletes push the boundaries in competition to develop race-proven performance you can bolt onto your Truck or SUV.

External reservoir allows for increase oil and nitrogen capacity while delivering striking race look. Applications are available to fit most stock and lifted Trucks and SUVs. Our complete line of bolt-on, Factory Series shocks provide improved damping in any terrain. Experience for yourself the incredible performance and precise control that Factory Race Series 2.5 Reservoir shocks deliver.

THIS PRODUCT FITS THE FOLLOWING:

• 2020 Ford Ranger
• 2019 Ford Ranger

Before any of our shocks reach production, they've had to stand the test of time and live up to incredible abuse by the fastest athletes in racing. We push the boundaries to give you that same precise control and race-proven performance you can feel. Our bolt-on Factory Race Series Coil-over Reservoir shocks provide improved damping in any terrain.

Coil-over shocks provide suspension damping and suspend the weight of the vehicle. The integrated coil spring can be adjusted for preload and ride height and come pre-set to level your vehicle right out of the box. Experience for yourself the incredible performance and precise control that Factory Series Coil-over Reservoir shocks deliver.

THIS PRODUCT FITS THE FOLLOWING:

DESCRIPTION

Update: Ford introduced a cast steel knuckle/spindle (painted black) in mid 2020 which has a different upper ball-joint taper than the aluminum versions (raw silver). We now include both sets of lower uniball spacers with our arms so everyone has what they need in one part number.

When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Our design incorporates a billet aluminum cover for the top of the uniball to keep dirt and other contaminants from working their way into the uniball. This cap is a slight press-fit and uses an o-ring seal.

Using the latest CAD/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control.

• Increases usable wheel travel
• Corrects camber and caster
• Eliminates weak factory ball-joints
• Thicker .156″ wall round tubing
• Laser cut & CNC bent tubes MIG welded
• CAD/CAM engineered
• Polyurethane frame pivot bushings with grease-able zerk fittings
• FK 1.25″ PTFE-lined uniballs pre-installed
• Steel gray powder-coating
• All necessary hardware included and ready to install
• Made in the USA
• Designed for 1-3″ of lift
• Includes uniball spacers for both aluminum and steel OEM knuckles