Addictive Desert Designs Stealth Fighter front bumper for the Dodge RAM 2500/3500 is a tight fitting radius designed bumper that gives your truck an aggressive stylish look. With a universal light mount system that allows up to a 40" radius LED bar or 10 cube lights, you can mix and match any brand and style light to give your truck the perfect lighting setup for your needs. A steel plate design gives your truck added protection as well as an upgraded look. Reinforced clevis mounts allow the use of 3/4" D-Rings.

Addictive Desert Designs Stealth Fighter front bumper for the RAM 1500 is a tight fitting radius designed bumper that gives your truck an aggressive stylish look. With a universal light mount system that allows up to a 40" radius LED bar or 10 cube lights, you can mix and match any brand and style light to give your truck the perfect lighting setup for your needs. A steel plate design gives your truck added protection as well as an upgraded look. Reinforced clevis mounts allow the use of 3/4" D-Rings.

The Dodge RAM 1500 has never looked better with the Stealth Fighter front bumper. A radius steel plate design gives your RAM truck added front end protection without all the extra bulk. Matching the RAM 1500 factory body lines, the Stealth Fighter front bumper is a tight fitting steel plate bumper that compliments the RAM's look. A patented universal light mount system allows mounting up to a 40" radius LED or 10 cube lights. Mount any combination of brand, size, and style light to give your Dodge RAM front bumper the added lighting that you need. Fully bolt-on means there is no cutting or welding required to install the Stealth Fighter front bumper. Reinforced D-Ring mounts provide your truck with added utility to pull through any tough situation, while optional parking sensor cutouts retain your truck's OEM amenities.

Upgrade your Dodge RAM 1500 rear bumper with the Stealth Fighter steel plate bumper. The unique styling transforms the look of your truck while retaining the utility of your factory tow hitch and trailer plug. Two rear facing cube light mounts provide your RAM with additional lighting and optional backup sensor cutouts retain your truck's utility. D-Ring mounts have been reinforced so your truck isn’t left stranded in a crucial situation. Fully bolt-on RAM bumper means that no cutting or welding is required for installation.

Heavy duty trucks call for heavy duty bumpers. The RAM 2500/3500 Bomber HD rear bumper takes the rugged plate steel design from the front bumper and brings it to the rear of the truck. Our reinforced clevis mounts provide a mounting point for 3/4" D-Rings for added utility. Lighting options include two rear facing cube lights mounts. OEM parking sensors are retained. As always, this product is fully bolt-on and made in America.

Addictive Desert Designs is proud to bring the Stealth Fighter line of bumpers to the 2020 Ram 2500/3500 platform. A radius plate steel design allows the bumper to stay tight to the front of the truck. Our universal light mount system in the center of the bumper allows the use of a 40" radius light bar or up to 10 cube lights. There is an additional cube light mount behind each side panel. Standard cutouts allow this bumper to retain OEM parking sensors. The Stealth Fighter comes standard with a winch mount that bolts directly to the vehicle’s frame for greater strength. Access holes in the top of the bumper ensure maximum winch functionality. Our clevis mounts also provide a reinforced mounting point for 3/4" D-rings. As always this product is fully bolt-on and made in America.

Our front bumper features a low-profile design and tight fitment. The center mount is compatible with one 20-inch LED light bar. The bumper is finished in a 2-stage hammer black powder coat, and it features satin black accent panels. The OEM parking sensors are retained. The bumper is made from steel, and it is fully bolt-on. Made in the USA.

* Please Note: The bumper is not compatible with the TRX trim level.

Our rear bumper provides additional protection to the rear of your truck. It is finished in a 2-stage hammer black powder coat, and it features satin black accent panels. The bumper retains the OEM rear step, parking sensors, and license plate lights. It is fully bolt-on, and constructed from steel. Made in the USA.

* Please Note: The bumper is not compatible with the TRX trim level.

ADD Offroad’s Light Hoop Add-On for the Ram TRX PRO Bolt-On Front Bumper enables you to add additional lighting on your bumper. Our hoop has 4 mounting locations for 6-inch round lights. As always, this has a fully bolt-on installation and is Made in America.

ADD Offroad’s Ram TRX PRO Bolt-On Front Bumper features a low profile and high clearance. The center of the bumper features inset mounting points for 8 cube lights or a 30-inch radius light bar. There is an optional light hoop able to hold four 6-inch round lights for maximum lighting on the trail.

All factory features have been integrated into the design. Mounting points for OEM marker lights and parking sensors are accounted for, and the OEM tow hooks remain intact.

A vented 1/8-inch aluminum skid plate allows for proper airflow to the cooler, and offers front-end protection while adding as little extra weight as possible. As always, this bumper is fully bolt-on and Made in America.

ADD Offroad’s Ram TRX PRO Bolt-On Rear Bumper is manufactured with a tubular steel frame coupled with steel & aluminum plates to provide solid protection to the rear of your truck, while still maximizing ground clearance.

There are 2 rear facing cube light mounting points that are protected by the tubular frame. The bumper retains holes for the OEM parking sensors, and also leaves the OEM tow hooks intact. The side wings of the bumper leave room for the factory bed step. As always, this is fully bolt-on and Made in America.

The Addictive Desert Designs Bomber Rear Bumper takes the same low profile plate steel design from the front bumper and brings it to the rear of the truck. Unique styling is combined with unrivaled quality to deliver a product that follows bodylines and fits the TRX perfectly.
The TRX Rear Bumper provides added utility with two rear facing cube light mounts. All OEM features, such as parking sensors and tow hooks remain fully functional. Cutouts in the bottom of the bumper form around the factory exhaust, while the side wings leave enough room for the factory bed step. As always, this product is fully bolt-on and made in America.

The Race Series Chase Rack brings a race-inspired look to the bed of your TRX. Sitting atop the rack is an actuator-controlled mounting point for a 50-inch light bar. This enables you to raise and lower your light bar, to fit in your garage or other low-clearance places. This was constructed using high strength .120” wall steel tubing and lightweight CNC cut aluminum paneling. Installation is simple, as the chase rack bolts-on without any modifications needed. Hardware and wiring harnesses for both the actuator and light bar are included with the rack. And as always, this is Made in America.

The Stealth Fighter Chase Rack brings a sleek plate steel design to the bed of your Ram TRX. The curve of the rack follows the lines of the cab perfectly and gives the option to mount a forward facing 50" light bar. A cutout in the cross member also retains full functionality of the factory third brake light. Installation is easy as this uses a clamp mount design that does not require any cutting or drilling into your Ram’s truck bed. The rack comes in hammer black powder coat and is made in America.

The Stealth Fighter Front Bumper is a low-profile plate steel design. The radiused front end keeps it tight to the front of your Ram TRX while following key bodylines to make it look like it belongs from the factory. A universal light mount system allows for a 40" curved light bar or up to cube lights in the center of the bumper, and there are two additional cube light mounts behind each side panel. A full skid plate comes down and attaches in factory mounting locations to make sure your shock reservoirs remain protected. OEM amenities such as parking sensors and marker lights are retained. Reinforced clevis mounts provide a mounting point for 3/4" D-Rings. As always, this product is fully bolt-on and made in America.

The Stealth Fighter Rear Bumper has a modern plate steel design that provides an aggressive look without being bulky. Clean lines and angles compliment the factory bodylines to give it a low-profile feel. Two rear facing cube light mounts are featured behind the panels. Parking sensor cutouts and trailer plug accommodations ensure that every OEM feature is retained. Reinforced clevis mounts provide a mounting point for 3/4" D-Rings, and the OEM bed step and tow hooks also remain fully functional. Cutouts along the bottom of the bumper give room to keep the factory dual exhaust. As always, this product is fully bolt-on and made in America.

This conversion kit enables your TRX Stealth Fighter Front Bumper to accommodate a winch. The winch mount bolts directly to the truck's frame to ensure maximum strength when in use, and is concealed behind the winch plate. The oil cooler is safely relocated to make room for the winch, and the included skid plate is vented to maintain positive airflow to the oil cooler.

Features:
Hammer Black Powder Coat
Satin Black Panels
Winch mount bolts directly to the truck's frame
Includes - Winch mount and bumper skid plate
Safely relocates your oil cooler
Air vents in the skid plate retain air flow to the oil cooler
Fully bolt-on
Made in America

This low-profile TRX front bumper features a prerunner inspired layout. The Phantom is constructed from plate steel for a more enhanced style, rather than the traditional tube steel. Its knife’s edge design was intended to mimic the look of trailing arms. A lightweight 3/16-inch aluminum skid plate provides full protection without adding excess weight. The skid also features vented cutouts for proper intercooler air flow.

The Phantom has several lighting options, including a central 20-inch radius light bar mount and 10-inch SR light mounts behind each side panel. The bumper features sensor mounts in order to retain full functionality of the parking sensors. As always, this is fully bolt-on and Made in America.

Made with plate steel and constructed in a modern box design, the Phantom TRX Rear Bumper provides superior protection over the factory option. It's designed to flow with the truck’s rear body style, and its wings flare out in a unique hammerhead style. The factory dual exhaust and tow hooks fit comfortably below the bumper, and sensor cutouts retain full functionality of the parking/backup warning system. Towards each end of the bumper are mounting points for a pair of 10-inch SR LED light bars set behind satin black aluminum accent panels. As always, this bumper is fully bolt-on and Made in the USA

Our Center Console Molle Panels & Digital Device Bridge enables you to keep your everyday carry gear at arms reach. It was designed to flow with the interior lines of your truck’s center console, and is finished in a dual-stage hammer black powder coat to complement the factory styling. Driver & passenger side molle panels offer mounting points for gear like pouches, multi-tools, holsters, or other molle accessories. Top plates with 10-24 PEM nuts run the length of the console and provide mounting points for RAM Mounts device holders. An additional bridge plate that crosses over the console features device mounting points, and is perfect for stowing your smartphone, GPS, radio mic, tablet, & other device holders.

* Please Note: Drilling is required for installation.

3 Possible Configurations:

Side Panels Only - The Side Molle Panels can be installed on their own, without the bridge. This offers you molle mounting options, as well as the upper side rails which are compatible with Ram Mounts device holders.
Side Panels & Bridge - This configuration provides you with the maximum utility, offering plentiful molle mounting options, and versatile device holder mounting locations at both the sides and the center of the console.
Bridge Only - Although the Device Bridge can be installed on its own, we strongly encourage you to install the side panels along with the bridge for the cleanest aesthetic.