The Stealth from Addictive Desert Designs takes the same high clearance styling from the front bumper and brings it to the rear of the truck. The modern plate steel design flows seamlessly with the factory bodylines. Two rear facing cube light mounts give additional lighting options to your vehicle. Parking sensor cutouts and blind spot module mounts mean you don’t lose any of your driver assist features. The OEM tow hitch and trailer plug are also retained. As always, this product is fully bolt-on and made in America.

Give your Ford Ranger an upgrade with the Stealth Fighter steel plate front bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end protection. Each Stealth Fighter bumper comes equipped with our patented universal light mount system in the center of the bumper. Mount up to 10 cube lights or a 40" radius light bar. Mix and match any brand and size light to give your Ford Ranger the optimal lighting setup that you need on your off-road adventures. Additional lighting behind the side panels can mount a single cube light per side. Reinforced clevis mounts are designed to accept 3/4" D-Rings for extra added utility.

Add style and protection to your Ford Ranger with the Stealth Fighter rear bumper. The steel plate design gives your Ford Ranger a modern look while also giving your truck superior protection without adding size and bulk. Reinforced clevis mounts designed to accept 3/4" D-Rings provides your Ford Ranger with extra utility. And mounts for two cube lights provide your truck with additional lighting when off-roading.

The GMC Sierra 1500 has never looked better with the Stealth Fighter front bumper. A radius plate steel design gives your GMC Sierra added front end protection without all the extra bulk. Matching the GMC 1500 body lines, the Stealth Fighter is a tight fitting bumper that compliments the GMC's look. Our patented universal light mount system allows mounting up to 10 cube lights or a 40" radius light bar in the center of the bumper. Mount any combination of brand, size, and style light to give your GMC the added lighting you need. Additional lighting mounts a single cube light behind each side panel. Fully bolt-on means that there is no cutting or welding required to install the Stealth Fighter front bumper. It is designed to keep the factory fog lights and comes with sensor cutouts to retain OEM features. Venting in your skid plate allows proper airflow to the intercooler found on diesel models. Reinforced D-Ring mounts and optional winch mount provide your truck with added utility to pull through any tough situation.

The Dodge RAM 1500 has never looked better with the Stealth Fighter front bumper. A radius steel plate design gives your RAM truck added front end protection without all the extra bulk. Matching the RAM 1500 factory body lines, the Stealth Fighter front bumper is a tight fitting steel plate bumper that compliments the RAM's look. A patented universal light mount system allows mounting up to a 40" radius LED or 10 cube lights. Mount any combination of brand, size, and style light to give your Dodge RAM front bumper the added lighting that you need. Fully bolt-on means there is no cutting or welding required to install the Stealth Fighter front bumper. Reinforced D-Ring mounts provide your truck with added utility to pull through any tough situation, while optional parking sensor cutouts retain your truck's OEM amenities.

Upgrade your Dodge RAM 1500 rear bumper with the Stealth Fighter steel plate bumper. The unique styling transforms the look of your truck while retaining the utility of your factory tow hitch and trailer plug. Two rear facing cube light mounts provide your RAM with additional lighting and optional backup sensor cutouts retain your truck's utility. D-Ring mounts have been reinforced so your truck isn’t left stranded in a crucial situation. Fully bolt-on RAM bumper means that no cutting or welding is required for installation.

Heavy duty trucks call for heavy duty bumpers. The RAM 2500/3500 Bomber HD rear bumper takes the rugged plate steel design from the front bumper and brings it to the rear of the truck. Our reinforced clevis mounts provide a mounting point for 3/4" D-Rings for added utility. Lighting options include two rear facing cube lights mounts. OEM parking sensors are retained. As always, this product is fully bolt-on and made in America.

Addictive Desert Designs is proud to bring the Stealth Fighter line of bumpers to the 2020 Ram 2500/3500 platform. A radius plate steel design allows the bumper to stay tight to the front of the truck. Our universal light mount system in the center of the bumper allows the use of a 40" radius light bar or up to 10 cube lights. There is an additional cube light mount behind each side panel. Standard cutouts allow this bumper to retain OEM parking sensors. The Stealth Fighter comes standard with a winch mount that bolts directly to the vehicle’s frame for greater strength. Access holes in the top of the bumper ensure maximum winch functionality. Our clevis mounts also provide a reinforced mounting point for 3/4" D-rings. As always this product is fully bolt-on and made in America.

Our front bumper features a low-profile design and tight fitment. The center mount is compatible with one 20-inch LED light bar. The bumper is finished in a 2-stage hammer black powder coat, and it features satin black accent panels. The OEM parking sensors are retained. The bumper is made from steel, and it is fully bolt-on. Made in the USA.

* Please Note: The bumper is not compatible with the TRX trim level.

Our rear bumper provides additional protection to the rear of your truck. It is finished in a 2-stage hammer black powder coat, and it features satin black accent panels. The bumper retains the OEM rear step, parking sensors, and license plate lights. It is fully bolt-on, and constructed from steel. Made in the USA.

* Please Note: The bumper is not compatible with the TRX trim level.

The Addictive Desert Designs Bomber Front Bumper for the 2020 and up Chevy 2500 is a slim fitting bumper. It’s made with plate steel and has full 3/16" aluminum skid plates, as well as reinforced mounts for 3/4" D-Rings.

This bumper features 3 Baja Designs LP6 light mounts as well as two additional cube light mounts behind the side panels. The Bomber is fully bolt-on.

Heavy duty trucks call for heavy duty bumpers. The Chevy Silverado 2500 Bomber HD front bumper features a rugged plate steel design. A separate plate mounts your winch directly to the frame for unrivaled strength. Our reinforced clevis mounts provide a mounting point for 3/4" D-Rings for more added utility. Multiple lighting options are available, including six Rigid 360 series lights, five Baja Designs LP6 lights, or dual 40" radius light bars. One cube light can also be mounted behind each side panel. OEM parking sensors are retained. As always, this product is fully bolt-on and made in America.

Now available for the Chevy 2500/3500 is the ADD Stealth Fighter Bumper. Following the trucks body lines perfectly, the radius steel plate design ensures the bumper fits snug to the truck's front. Our centered universal light mount system allows for up to 10 cube lights or a 40" radius light bar. Each side panel comes equipped with an additional cube light mount and standard cutouts allow all OEM parking sensors to remain intact. All Stealth Fighters come with a standard winch mount bolting directly to the vehicle's frame for increased strength. Access holes in the top of the bumper ensure maximum winch functionality and performance. Our clevis mounts also provide a reinforced mounting point for 3/4" D-rings. As always this product is fully bolt-on and made in America.

Heavy duty trucks call for heavy duty bumpers. The Chevy/GMC 2500 Bomber HD rear bumper takes the rugged plate steel design from the front bumper and brings it to the rear of the truck. Our reinforced clevis mounts provide a mounting point for 3/4" D-Rings for added utility. Lighting options include two rear facing cube lights mounts. All factory amenities, such as blind spot monitors and parking sensors, are retained. As always, this product is fully bolt-on and made in America.

Heavy duty trucks call for heavy duty bumpers. The GMC Sierra 2500 Bomber HD front bumper features a rugged plate steel design. A separate plate mounts your winch directly to the frame for unrivaled strength. Our reinforced clevis mounts provide a mounting point for 3/4" D-Rings for more added utility. Multiple lighting options are available, including six Rigid 360 series lights, five Baja Designs LP6 lights, or dual 40" radius light bars. One cube light can also be mounted behind each side panel. OEM parking sensors are retained. As always, this product is fully bolt-on and made in America.

Addictive Desert Designs has done it again! Stealth Fighter Bumpers are now available for all GMC 2500/3500 models. With precision engineering, our radius steel plate design contours perfectly to the front end of your truck. A universal light mount, centered on the bumper, provides space for up to 10 cube lights or a 40" radius light bar. Standard cutouts allow OEM parking sensors to be fully-retained and side panels come with an additional cube light. For added strength, Stealth Fighter's bolt directly to the truck's frame with a standard winch mount. Functionality and durability are maximized with access holes at the top of the bumper. Clevis mounts provide added reinforcement with a mounting point for 3/4" D-rings. Always bolt-on, always made in America.

Provide a unique look to your Jeep Gladiator with the Race Series chase rack. Mounting options for a 40" light bar provides additional lighting for those off-road night adventures. Featuring our light actuator kit to raise and lower a front facing light bar so you can tuck it away when not in use. A sleek design on the Race Series chase rack makes your Gladiator stand out from the crowd. Laser cut aluminum panels reduce weight and allow for a precise fit. The Race Series chase rack is 100% bolt on, and Made in the USA.

Addictive Desert Designs Jeep Gladiator Stealth Fighter rear bumper is one of the slimmest bumpers on the market. The low profile plate steel design provides a unique style without adding bulk or size to the Gladiator.
Two rear facing cube light mounts come standard with the Stealth Fighter. Full OEM features such as parking sensors are retained, and integrated reinforced clevis mounts accept a 3/4" D-ring for added utility.

The Addictive Desert Designs Bomber Front Bumper is a slim fitting bumper for your 2020-2023 GMC 2500/3500. A modern plate steel design gives a clean look, while the full 3/16"" aluminum skid plate cuts down on weight. Reinforced mounts for 3/4"" D-Rings bolt straight to your frame for unrivaled strength.

This GMC 2500/3500 Front Bumper comes with mounts for 4 Rigid 360 6” lights, and two additional cube light mounts behind the side panels. As always, this bumper is fully bolt-on and made in America by ADD Offroad.

The fully formed and radiused main tube of the ADD PRO Bolt-on sits flush to the front of your 2021 ZR2 giving a clean, low-profile look. OEM amenities, such as the tow hooks and skid plate are retained.

A universal light mount system in the center of the bumper allows the use of a 20" radius bar or up to 6 cube lights. .120" Wall steel tubing provides the skeleton of this bumper while the skid plate is CNC cut from 1/8" aluminum. For OEM bumper removal the front fascia will need to be cut, but the bumper is otherwise bolt-on. As always, this bumper is made in America.